China manufacturer Low Investment Honeycomb Coal Machine front drive shaft

Product Description

Introduction of low investment honeycomb coal machine:

Honeycomb coal briquette machine takes the coal powder, charcoal powder, gypsum powder, sawdust or others as raw materials, through mixing, pressing and molding the materials into honeycomb shaped briquettes.
 
It has a lot of molds and types, and we can change the moulds to manufacture different shapes and size of briquettes, like cylindrical shape, square shape, rod shape, flower shape and other shapes, which expand the function of the machine greatly. So our honeycomb coal briquette macine is an ideal equipment in many industry.
 
The outlet coal briquettes can be used for cooking, burning for boiler, heating, keeping warm, etc. And the final charcoal briquettes are usually used for barbecue.
 
Honeycomb coal briquette machine, through many times’ development, is mainly used for home cooking and keeping warm, chemical industry, metallurgy industry, electric industry, refractory industry and others.
 
What’s more, the diameter of the briquette can be 140mm,160mm, 180mm, 220mm, etc. Fully custom-made services , makes this kind of homeycomb briuqette machine meet most customers’ special requirement.
 
 

Features and Advantages

1. The finished production from coal briquette machine can be widely used in many fields, such as BBQ, home, factory, etc.

2. With our self researched formula, the outlet briquette is smokeless, easily fired by lighter, long burning, very convenient and helth.

3. If you buy from us, we will teach you the technology of fast and long burning.

4. Spline shaft and fully enclosed gear reducer make sure our machines point accurately. Low failure rate.

5. Each coal briquette machine can be equipped with various molds for different needs

6. Flammable, produce high calorific value 4000-6500 kcal.

8. Durable burning time is 80-100 minutes.

9. Widely used, never saturated the market.

10. CE, ISO and BV certificate.
 

Structure 

The structure of honeycomb coal briquette machine is very simple, and it consists of main body, rotating system, feeding system, presing system and discharging system.
And each system interwork and running smoothly.

1. Main body: It consists of bedplate and engine base, which are the frame of the machine.

2. Rotating system: It is composed of motor, belt pulley, gear and tranmission shaft.

3. Feeding system: It is made up of rotating shaft, hopper and stirrer. The axial gear drive the stirrer, mixing the coal evenly and sending the coal into the former.

4. Pressing system: It consists of 4 pcs slide bar, slide beam, punch, punch holder, punch head, pressrue plate, mould end and spring. When the machine working, the slide bar will drive the slide beam, punch head goes down and pressure plate will go up, then the spring retrench, then press the coal into briquettes.

5. Discharging system: It consist of transmission rack, belt pulley, holder and conveyor belt. The conveyor betl driving and bring the shaped briquettes out of the machine. There is some roses on the transmission holder to adjust the tightness of conveyor belt.
 

Technical Data

Model Motor Power
(KW)
Capacity
 (Pcs/Min)
Weight
(t)
Size of briquette(mm)
Circle Square
SMQ 140 7.5 50   1.8 <Φ140 <100*100
SMQ 160 7.5 50   2.2 <Φ160 <120*120
SMQ 180 7.5 40   2.5 <Φ180 <150*150
SMQ 220 11 22-26   3.8 <Φ220 <200*200

Shipping Cost:

Estimated freight per unit.



To be negotiated
Pressing Mode: Extrude
Product Shape: Cylinder Shape
Motor Type: AC Motor
Customization:
Available

|

Customized Request

splineshaft

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China manufacturer Low Investment Honeycomb Coal Machine   front drive shaft	 China manufacturer Low Investment Honeycomb Coal Machine   front drive shaft
editor by CX 2023-05-09