China Gjza 500-1900mm Length Customized Spline Rolling Ball Spline Shaft for Medical Equipment drive shaft coupling

Item Description

Product Description

The spline is a type of linear movement system. When spline motions along the precision floor Shaft by balls, the torque is transferred. The spline has compact framework. It can transfer the Above load and motive power. It has for a longer time life time. At present the manufacturing unit manufacture 2 varieties of spline, namely convex spline and concave spline. Usually the convex spline can get greater radial load and torque than concave spline.
 

Solution title Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Content Bearing Metal
Precision Course Regular/ Higher/ Specific
Deal Plastic bag, box, carton
MOQ 1pc

Ball kind:φ16-φ250
Substantial pace , substantial precision
Large load , lengthy existence
Flexible movement,low power consumption
High motion pace
Heavy load and extended service existence
Applicationgs:semiconductor tools,tire machinery,monocrystalline silicon furnace,medical rehabilitation gear

Detailed Photographs

 

Merchandise Parameters

Composition

Scope of software

Semiconductor tools,tire machinery,monocrystalline silicon furnace,health-related rehabilitation gear.

FFZ dimension

Code and type Nominal axial dia.
d
Exterior dia.
D
Size of spline nut
L1
Max. length of shaft
L
Regular rated torque Simple rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C kN
GJZ15 / GJF15 15 23 forty four hundred 27.eight 65.two 3.nine 8.one
GJZ20 / GJF20 twenty thirty fifty 600 62.3 135.2 six.6 12.7
GJZ25 / GJF25 25 38 sixty 800 127.3 268.3 ten.9 20.two
GJZ30 / GJF30 30 forty five 70 1400 a hundred and fifty five.seven 318.7 eleven.1 20
GJZ32 / GJF32 32 48 70 1400 236.4 459.9 fifteen.eight 27.one
GJZ40 / GJF40 40 60/57 ninety 1500 548 1081.nine 29.three 50.9
GJZ50 / GJF50 fifty seventy five/70 100 1500 880.six 1711.6 37.7 sixty four.5
GJF60 sixty eighty five 127 1500 2135.nine 4172.9 seventy six.2 131.one
GJZ70 / GJF70 70 a hundred a hundred and ten/a hundred thirty five 1700 2788/3153.4 4141.one seventy six.1 111.5/156.1
GJZ85 / GJF85 eighty five one hundred twenty 140/155 1900 3978/4437.two 6927.four 100.two 153.6/179.2
GJZ100 / GJF100 one hundred a hundred and forty/135 one hundred sixty 1900 6905.nine 11737.two 147.nine 221.3

 If you have any needs,pls feel totally free to speak to us and we will ship you our catalog for reference.

Major Merchandise

Firm Profile

Client Feedback

FAQ

1. Why choose AZI China?
With much more than 60 years of manufacturing encounter, quality assurance,factory right value.

2. What is your major items ? 
Our Main products are consist of ball screw,linear information,arc linear information,ball spline and ball screw linear CZPT rail module.

three. How to Custom-manufactured (OEM/ODM)?
If you have a solution drawing or a sample, make sure you deliver to us, and we can customized-made the as your needed. We will also provide our expert advices of the items to make the layout to be much more realized & maximize the performance.

four. When can I get the quotation?
We usually estimate inside of 24 hours after we get your inquiry. If you are really urgent to get the cost,please call us or tell us in your electronic mail so that we will regard your inquiry precedence.

5. How can I get a sample to verify the top quality?
We quote in accordance to your drawing, the price is suitable, signal the sample record.

sixWhats your payment terms?
Our payment phrases is thirty% deposit,stability from obtaining copy of B/L or L/C sight.

Material: Gcr15
Load: Customized
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: Customized
Axis Shape: Straight Shaft
Transport Package: Cartons or Wooden Box

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product name Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Material Bearing Steel
Precision Class Normal/ High/ Precise
Package Plastic bag, box, carton
MOQ 1pc

###

Code and type Nominal axial dia.
d0
External dia.
D
Length of spline nut
L1
Max. length of shaft
L
Standard rated torque Basic rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C0 kN
GJZ15 / GJF15 15 23 40 400 27.8 65.2 3.9 8.1
GJZ20 / GJF20 20 30 50 600 62.3 135.2 6.6 12.7
GJZ25 / GJF25 25 38 60 800 127.3 268.3 10.9 20.2
GJZ30 / GJF30 30 45 70 1400 155.7 318.7 11.1 20
GJZ32 / GJF32 32 48 70 1400 236.4 459.9 15.8 27.1
GJZ40 / GJF40 40 60/57 90 1500 548 1081.9 29.3 50.9
GJZ50 / GJF50 50 75/70 100 1500 880.6 1711.6 37.7 64.5
GJF60 60 85 127 1500 2135.9 4172.9 76.2 131.1
GJZ70 / GJF70 70 100 110/135 1700 2788/3153.4 4141.1 76.1 111.5/156.1
GJZ85 / GJF85 85 120 140/155 1900 3978/4437.2 6927.4 100.2 153.6/179.2
GJZ100 / GJF100 100 140/135 160 1900 6905.9 11737.2 147.9 221.3
Material: Gcr15
Load: Customized
Stiffness & Flexibility: Stiffness / Rigid Axle
Journal Diameter Dimensional Accuracy: Customized
Axis Shape: Straight Shaft
Transport Package: Cartons or Wooden Box

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product name Ball spline
Model GJZ,GJZA,GJF,GJH,GJZG,GJFG,
Dia 15mm-150mm
Material Bearing Steel
Precision Class Normal/ High/ Precise
Package Plastic bag, box, carton
MOQ 1pc

###

Code and type Nominal axial dia.
d0
External dia.
D
Length of spline nut
L1
Max. length of shaft
L
Standard rated torque Basic rated load
Dynamic torsion
N-m
Stationary torsion 
N-m
Dynamic load
C kN
Static load
C0 kN
GJZ15 / GJF15 15 23 40 400 27.8 65.2 3.9 8.1
GJZ20 / GJF20 20 30 50 600 62.3 135.2 6.6 12.7
GJZ25 / GJF25 25 38 60 800 127.3 268.3 10.9 20.2
GJZ30 / GJF30 30 45 70 1400 155.7 318.7 11.1 20
GJZ32 / GJF32 32 48 70 1400 236.4 459.9 15.8 27.1
GJZ40 / GJF40 40 60/57 90 1500 548 1081.9 29.3 50.9
GJZ50 / GJF50 50 75/70 100 1500 880.6 1711.6 37.7 64.5
GJF60 60 85 127 1500 2135.9 4172.9 76.2 131.1
GJZ70 / GJF70 70 100 110/135 1700 2788/3153.4 4141.1 76.1 111.5/156.1
GJZ85 / GJF85 85 120 140/155 1900 3978/4437.2 6927.4 100.2 153.6/179.2
GJZ100 / GJF100 100 140/135 160 1900 6905.9 11737.2 147.9 221.3

The Different Types of Splines in a Splined Shaft

A splined shaft is a machine component with internal and external splines. The splines are formed in four different ways: Involute, Parallel, Serrated, and Ball. You can learn more about each type of spline in this article. When choosing a splined shaft, be sure to choose the right one for your application. Read on to learn about the different types of splines and how they affect the shaft’s performance.
splineshaft

Involute splines

Involute splines in a splined shaft are used to secure and extend mechanical assemblies. They are smooth, inwardly curving grooves that resist separation during operation. A shaft with involute splines is often longer than the shaft itself. This feature allows for more axial movement. This is beneficial for many applications, especially in a gearbox.
The involute spline is a shaped spline, similar to a parallel spline. It is angled and consists of teeth that create a spiral pattern that enables linear and rotatory motion. It is distinguished from other splines by the serrations on its flanks. It also has a flat top. It is a good option for couplers and other applications where angular movement is necessary.
Involute splines are also called involute teeth because of their shape. They are flat on the top and curved on the sides. These teeth can be either internal or external. As a result, involute splines provide greater surface contact, which helps reduce stress and fatigue. Regardless of the shape, involute splines are generally easy to machine and fit.
Involute splines are a type of splines that are used in splined shafts. These splines have different names, depending on their diameters. An example set of designations is for a 32-tooth male spline, a 2,500-tooth module, and a 30 degree pressure angle. An example of a female spline, a fillet root spline, is used to describe the diameter of the splined shaft.
The effective tooth thickness of splines is dependent on the number of keyways and the type of spline. Involute splines in splined shafts should be designed to engage 25 to 50 percent of the spline teeth during the coupling. Involute splines should be able to withstand the load without cracking.

Parallel splines

Parallel splines are formed on a splined shaft by putting one or more teeth into another. The male spline is positioned at the center of the female spline. The teeth of the male spline are also parallel to the shaft axis, but a common misalignment causes the splines to roll and tilt. This is common in many industrial applications, and there are a number of ways to improve the performance of splines.
Typically, parallel splines are used to reduce friction in a rotating part. The splines on a splined shaft are narrower on the end face than the interior, which makes them more prone to wear. This type of spline is used in a variety of industries, such as machinery, and it also allows for greater efficiency when transmitting torque.
Involute splines on a splined shaft are the most common. They have equally spaced teeth, and are therefore less likely to crack due to fatigue. They also tend to be easy to cut and fit. However, they are not the best type of spline. It is important to understand the difference between parallel and involute splines before deciding on which spline to use.
The difference between splined and involute splines is the size of the grooves. Involute splines are generally larger than parallel splines. These types of splines provide more torque to the gear teeth and reduce stress during operation. They are also more durable and have a longer life span. And because they are used on farm machinery, they are essential in this type of application.
splineshaft

Serrated splines

A Serrated Splined Shaft has several advantages. This type of shaft is highly adjustable. Its large number of teeth allows large torques, and its shorter tooth width allows for greater adjustment. These features make this type of shaft an ideal choice for applications where accuracy is critical. Listed below are some of the benefits of this type of shaft. These benefits are just a few of the advantages. Learn more about this type of shaft.
The process of hobbing is inexpensive and highly accurate. It is useful for external spline shafts, but is not suitable for internal splines. This type of process forms synchronized shapes on the shaft, reducing the manufacturing cycle and stabilizing the relative phase between spline and thread. It uses a grinding wheel to shape the shaft. CZPT Manufacturing has a large inventory of Serrated Splined Shafts.
The teeth of a Serrated Splined Shaft are designed to engage with the hub over the entire circumference of the shaft. The teeth of the shaft are spaced uniformly around the spline, creating a multiple-tooth point of contact over the entire length of the shaft. The results of these analyses are usually satisfactory. But there are some limitations. To begin with, the splines of the Serrated Splined Shaft should be chosen carefully. If the application requires large-scale analysis, it may be necessary to modify the design.
The splines of the Serrated Splined Shaft are also used for other purposes. They can be used to transmit torque to another device. They also act as an anti-rotational device and function as a linear guide. Both the design and the type of splines determine the function of the Splined Shaft. In the automobile industry, they are used in vehicles, aerospace, earth-moving machinery, and many other industries.

Ball splines

The invention relates to a ball-spinned shaft. The shaft comprises a plurality of balls that are arranged in a series and are operatively coupled to a load path section. The balls are capable of rolling endlessly along the path. This invention also relates to a ball bearing. Here, a ball bearing is one of the many types of gears. The following discussion describes the features of a ball bearing.
A ball-splined shaft assembly comprises a shaft with at least one ball-spline groove and a plurality of circumferential step grooves. The shaft is held in a first holding means that extends longitudinally and is rotatably held by a second holding means. Both the shaft and the first holding means are driven relative to one another by a first driving means. It is possible to manufacture a ball-splined shaft in a variety of ways.
A ball-splined shaft features a nut with recirculating balls. The ball-splined nut rides in these grooves to provide linear motion while preventing rotation. A splined shaft with a nut that has recirculating balls can also provide rotary motion. A ball splined shaft also has higher load capacities than a ball bushing. For these reasons, ball splines are an excellent choice for many applications.
In this invention, a pair of ball-spinned shafts are housed in a box under a carrier device 40. Each of the two shafts extends along a longitudinal line of arm 50. One end of each shaft is supported rotatably by a slide block 56. The slide block also has a support arm 58 that supports the center arm 50 in a cantilever fashion.
splineshaft

Sector no-go gage

A no-go gauge is a tool that checks the splined shaft for oversize. It is an effective way to determine the oversize condition of a splined shaft without removing the shaft. It measures external splines and serrations. The no-go gage is available in sizes ranging from 19mm to 130mm with a 25mm profile length.
The sector no-go gage has two groups of diametrally opposed teeth. The space between them is manufactured to a maximum space width and the tooth thickness must be within a predetermined tolerance. This gage would be out of tolerance if the splines were measured with a pin. The dimensions of this splined shaft can be found in the respective ANSI or DIN standards.
The go-no-go gage is useful for final inspection of thread pitch diameter. It is also useful for splined shafts and threaded nuts. The thread of a screw must match the contour of the go-no-go gage head to avoid a no-go condition. There is no substitute for a quality machine. It is an essential tool for any splined shaft and fastener manufacturer.
The NO-GO gage can detect changes in tooth thickness. It can be calibrated under ISO17025 standards and has many advantages over a non-go gage. It also gives a visual reference of the thickness of a splined shaft. When the teeth match, the shaft is considered ready for installation. It is a critical process. In some cases, it is impossible to determine the precise length of the shaft spline.
The 45-degree pressure angle is most commonly used for axles and torque-delivering members. This pressure angle is the most economical in terms of tool life, but the splines will not roll neatly like a 30 degree angle. The 45-degree spline is more likely to fall off larger than the other two. Oftentimes, it will also have a crowned look. The 37.5 degree pressure angle is a compromise between the other two pressure angles. It is often used when the splined shaft material is harder than usual.

China Gjza 500-1900mm Length Customized Spline Rolling Ball Spline Shaft for Medical Equipment     drive shaft coupling	China Gjza 500-1900mm Length Customized Spline Rolling Ball Spline Shaft for Medical Equipment     drive shaft coupling
editor by czh 2022-12-19