China Involute Spline Core Shaft for Co-Rotating Screw Elements and Segmented Barrel with Good quality

Product Description

Detail Information For All Brand Core Shafts,  Screw Elements and Segmented Barrel :

Specification: 
Diameter: Ø20mm-Ø350mm

Application:
Plastic pelletizing and modification, masterbatch, paper industry, chemical industry, food, feed industry, cable materials, pharmaceutical industry, powder coating and paint.

Our Products Can Be Used In Following Extrusion:
APV, KOBE, OMC, Buhler, KraussMaffei, Theysohn, Buss, Berstorff, Toshiba, Clextral, Labtech, USEON, Coperion, Lantai, JSW, Leistritz, Keya, Maris, CZPT and others.

The types for screw elements:
Convey element, mixing element, kneading block & disk element, transition element, deep groove transfer element, side feeder element, 1 flighted, 2 flighted, 3 flighted screw elements, SME, ZME, TME and etc.

The types for segmented barrel:  
Feeding barrel, closed barrel, vent barrel, combi barrel, extended degassing barrel, combi barrel with backward venting and etc.  

The types for core shaft:  
Single Keyway, square Keyslot, high torque key button, dual keyslot, involute inner spline, round keyslot, retackle spline and etc.        

Material for screw element:
W6Mo5Cr4V2——cost-effective material

PM-HIP material : SAM10, SAM26, SAM39, CPM10V, CPM9V

Material for segmented barrel:

38CrMoAIA————-cost-effective material

Bimetallic quality——-has different quality for abrasive& corrosive resistance
PM-HIP material——–top quality

Material for core shaft:

40CrNiMo——-cost-effective material; has good performance in torque force resistance, abrasive& corrosive resistance, high temperature resistance.

Heat treatment:
Advance hardening and tempering
Nitriding treatment
Vaccum hardening
Mid/high-frequency hardening

OULIN SCREW:  YOUR LOYAL PARTNER FOR SCREW AND BARREL

 

US $500-10,000
/ Pair
|
1 Pair

(Min. Order)

###

After-sales Service: If Has Quality Defects, a New One Will Be Made.
Warranty: 180 Days
Standard: DIN, JIS
Technics: Cutting, Heat Treatment, Pta Welding, Casting
Feature: Long Working Life
Material: High Speed Steel

###

Customization:
US $500-10,000
/ Pair
|
1 Pair

(Min. Order)

###

After-sales Service: If Has Quality Defects, a New One Will Be Made.
Warranty: 180 Days
Standard: DIN, JIS
Technics: Cutting, Heat Treatment, Pta Welding, Casting
Feature: Long Working Life
Material: High Speed Steel

###

Customization:

Standard Length Splined Shafts

Standard Length Splined Shafts are made from Mild Steel and are perfect for most repair jobs, custom machinery building, and many other applications. All stock splined shafts are 2-3/4 inches in length, and full splines are available in any length, with additional materials and working lengths available upon request and quotation. CZPT Manufacturing Company is proud to offer these standard length shafts.
splineshaft

Disc brake mounting interfaces that are splined

There are two common disc brake mounting interfaces, splined and center lock. Disc brakes with splined interfaces are more common. They are usually easier to install. The center lock system requires a tool to remove the locking ring on the disc hub. Six-bolt rotors are easier to install and require only six bolts. The center lock system is commonly used with performance road bikes.
Post mount disc brakes require a post mount adapter, while flat mount disc brakes do not. Post mount adapters are more common and are used for carbon mountain bikes, while flat mount interfaces are becoming the norm on road and gravel bikes. All disc brake adapters are adjustable for rotor size, though. Road bikes usually use 160mm rotors while mountain bikes use rotors that are 180mm or 200mm.
splineshaft

Disc brake mounting interfaces that are helical splined

A helical splined disc brake mounting interface is designed with a splined connection between the hub and brake disc. This splined connection allows for a relatively large amount of radial and rotational displacement between the disc and hub. A loosely splined interface can cause a rattling noise due to the movement of the disc in relation to the hub.
The splines on the brake disc and hub are connected via an air gap. The air gap helps reduce heat conduction from the brake disc to the hub. The present invention addresses problems of noise, heat, and retraction of brake discs at the release of the brake. It also addresses issues with skewing and dragging. If you’re unsure whether this type of mounting interface is right for you, consult your mechanic.
Disc brake mounting interfaces that are helix-splined may be used in conjunction with other components of a wheel. They are particularly useful in disc brake mounting interfaces for hub-to-hub assemblies. The spacer elements, which are preferably located circumferentially, provide substantially the same function no matter how the brake disc rotates. Preferably, three spacer elements are located around the brake disc. Each of these spacer elements has equal clearance between the splines of the brake disc and the hub.
Spacer elements 6 include a helical spring portion 6.1 and extensions in tangential directions that terminate in hooks 6.4. These hooks abut against the brake disc 1 in both directions. The helical spring portion 5.1 and 6.1 have stiffness enough to absorb radial impacts. The spacer elements are arranged around the circumference of the intermeshing zone.
A helical splined disc mount includes a stabilizing element formed as a helical spring. The helical spring extends to the disc’s splines and teeth. The ends of the extension extend in opposite directions, while brackets at each end engage with the disc’s splines and teeth. This stabilizing element is positioned axially over the disc’s width.
Helical splined disc brake mounting interfaces are popular in bicycles and road bicycles. They’re a reliable, durable way to mount your brakes. Splines are widely used in aerospace, and have a higher fatigue life and reliability. The interfaces between the splined disc brake and BB spindle are made from aluminum and acetate.
As the splined hub mounts the disc in a helical fashion, the spring wire and disc 2 will be positioned in close contact. As the spring wire contacts the disc, it creates friction forces that are evenly distributed throughout the disc. This allows for a wide range of axial motion. Disc brake mounting interfaces that are helical splined have higher strength and stiffness than their counterparts.
Disc brake mounting interfaces that are helically splined can have a wide range of splined surfaces. The splined surfaces are the most common type of disc brake mounting interfaces. They are typically made of stainless steel or aluminum and can be used for a variety of applications. However, a splined disc mount will not support a disc with an oversized brake caliper.

China Involute Spline Core Shaft for Co-Rotating Screw Elements and Segmented Barrel     with Good quality China Involute Spline Core Shaft for Co-Rotating Screw Elements and Segmented Barrel     with Good quality
editor by czh 2022-11-30